FMCJ450- ADRV9009 based dual receiver dual transmitter RF FMC sub-card

Item No.: 450
The ADRV9009 is a highly integrated radio frequency (RF), agile transceiver, dual-channel transmitter and receiver, integrated frequency synthesizer, and digital signal processing.This IC has a diversified combination of high performance and low power con
Description
1.Overview of the board card
The ADRV9009 is a highly integrated radio frequency (RF), agile transceiver, dual-channel transmitter and receiver, integrated frequency synthesizer, and digital signal processing.This IC has a diversified combination of high performance and low power consumption. The FMC sub-card is a two channel input and two channel output RF transceive card, which can work with FPGA to meet the application requirements of 3G, 4G and 5G macro cellular TIME Division duplex (TDD) base station.


2.technical indicator 

  • double transmitter
  • dual receiver
  • Shared observation of receiver with two inputs
  • biggest receiver bandwidth: 200 MHz
  • tunable transmitters biggest synthetic bandwidth: 450 MHz
  • maximum observed receiver bandwidth: 450 MHz
  •  fully integrated fractional N radio frequency synthesizer
  • fully integrated clock synthesizer
  •  more suitable for rf LO and baseband clock chip phase synchronization
  • JESD204B interface data path
  •  tuning range: 75 MHz to 6000 MHz
  No. Items Specifications Remark
Tx 1 Frequency 100~6000MHz  
2 Bandwidth Up to 450 MHz Tx real-time bandwidth, tunable
3 Transmission Power 17dBm 100~6000MHz, CW
4 EVM <0.7%  
5 Gain Control Range 32dB  
6 Gain Step 0.05 dB  
7 ACLR                < -64dBc @0dBm output
8 Spurious 60dBc  
9 SSB Suppression 65dBc  
10 LO Suppression 70dBc  
11 DAC Sample Rate (max) 122.88MS/s  
12 DAC Resolution 14bits  
 
Rx 1 Frequency 100~6000MHz  
2 Bandwidth 8 to 200 MHz real-time bandwidth, tunable
3 Sensitivity: -93dBm@20MHz Noise Figure <3dB
4 EVM <1.5% @ -30dBm input
5 Gain Control Range 61.5dB Including 30dB of ADRV9009 inside
6 Gain Step 0.5dB  
7 Rx Alias Band Rejection 80dB Due to digital filters
8 Noise Figure <3dB Maximum RX gain
9 IIP3 (@ typ NF) -25dBm  
10 ADC Sample Rate (max) 122.88 MS/s  
11 ADC Resolution 16bits  
12 ADC Wideband SFDR 78dBc  
  1 Voltage 3.3V& 12V  
2 ON/OFF TIME <6uS TDD model
  3 Duplexing Model TDD  
  4 Power Consumptions <6W  
 
 
3.Product application

3G/4G/5G TDD macro cellular base station; TDD active antenna system; Large-scale MIMO; Electronic warfare; Portable test equipment
 
 4.Software system
Provide support for ZYNQ FMC interface test program source code
 
5.Physical property
The board follows the FMC specification, HPC and is 76.5x69mm in size.
   6.power supply requirement

FMC interface+12V power supply
7.ADRV9009 application software
Software architecture


 
 AD collect 1.2g waveform:


DA output setting 1.2g and waveform: