FMC154- Based on FMC eight channel SFP+ 10 gigabit fiber sub card

Name: FMC154- Based on FMC eight channel SFP+ 10 gigabit fiber sub card
Brand: Orihard
SKU: 154
Availability: InStock
Rating: 5 (1 reviews)

Item No.: 154

INQUIRY PDF Format

Description

1. The overview of the board card
This card is an FPGA sandwich card (FMC) module, which can provide up to 8 SFP/SFP + module interfaces and plug directly into a Celines FPGA with gigabit level transceiver (MGT). Support industry standard small pluggable (SFP/SFP +) transceiver module interface.
The board card supports the simultaneous use of eight channel fiber, or the use of eight channel top or eight channel bottom.

2.Performance indicators

Function	Parameters		Contents
SFP+ optical fiber	Channel amount		Eight channel
	GTX channel amount		Eight channel
	Single channel rate		2.5Gbps,3.125Gbps,6.25Gbps,10Gbps
	Support protocol		Aurora，RapidIO，10G Ethernet
	Digital interface		FPGA GTX LVDS
Clock	Channel amount		Two channel
	On-board crystal		156.25MHz
Connector type	FMC-HPC		ASP-134488-01
	Front board		8 channel SFP+，Multimode or single mode PCB top side four channel，bottom side four channel
Standard	FMC ANSI/VITA 57.1 - 2008
Size	69X76.5mm
weight	（within heat sink）
Power supply	+12V@1A
Power consumption	8W
Working temperature	Industrial -20℃ to +70℃
Support motherboard	Xilinx board	V6、V7、KU、VU、 ZYNQ、ZU development board
	Orihard board	136、270、367、288、330、274、3、9

3.Software content
Provide the REFERENCE test program for THE ISE or Vivado version of the FMC interface SFP+ Aurora 10Gbps loopback, and see the instruction table for the supported FPGA model or board card.

4. Board card application
The board card is configured with FPGA motherboard for 10Gbps optical fiber transceiver scene.

FMC154- Based on FMC eight channel SFP+ 10 gigabit fiber sub card

3.Software content Provide the REFERENCE test program for THE ISE or Vivado version of the FMC interface SFP+ Aurora 10Gbps loopback, and see the instruction table for the supported FPGA model or board card.

3.Software content
Provide the REFERENCE test program for THE ISE or Vivado version of the FMC interface SFP+ Aurora 10Gbps loopback, and see the instruction table for the supported FPGA model or board card.